archived old stuff;new layout

2022-archive/debian/polybar/material/bars.ini

@@ -0,0 +1,494 @@
+;; ┌────────────────────────────────────────────────────┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▄░█▀█░█▀▄░█▀▀│
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█▀▄░█▀█░█▀▄░▀▀█│
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀░░▀░▀░▀░▀░▀▀▀│
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░│
+;; └────────────────────────────────────────────────────┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[bar]
+fill = 
+empty = 
+indicator = 
+
+[module/volume]
+type = internal/alsa
+
+; Soundcard to be used
+; Usually in the format hw:# where # is the card number
+; You can find the different card numbers in `/proc/asound/cards`
+master-soundcard = default
+speaker-soundcard = default
+headphone-soundcard = default
+
+; Name of the master, speaker and headphone mixers
+; Use the following command to list available mixer controls:
+; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
+; If master, speaker or headphone-soundcard isn't the default, 
+; use `amixer -c # scontrols` instead where # is the number 
+; of the master, speaker or headphone soundcard respectively
+;
+; Default: Master
+master-mixer = Master
+
+; Optionally define speaker and headphone mixers
+; Default: none
+;;speaker-mixer = Speaker
+; Default: none
+;;headphone-mixer = Headphone
+
+; NOTE: This is required if headphone_mixer is defined
+; Use the following command to list available device controls
+; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
+; You may also need to use `amixer -c # controls` as above for the mixer names
+; Default: none
+;;headphone-id = 9
+
+; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
+; Default: false
+;;mapped = true
+
+; Interval for volume increase/decrease (in percent points)
+; Default: 5
+interval = 5
+
+; Available tags:
+;   <label-volume> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-volume = <ramp-volume> <bar-volume>
+
+; Available tags:
+;   <label-muted> (default)
+;   <ramp-volume>
+;   <bar-volume>
+format-muted = <label-muted>
+format-muted-prefix = 
+
+; Available tokens:
+;   %percentage% (default)
+label-volume = %percentage%%
+
+; Available tokens:
+;   %percentage% (default
+label-muted = " Muted"
+label-muted-foreground = ${color.foreground-alt}
+
+; Only applies if <ramp-volume> is used
+ramp-volume-0 = 
+ramp-volume-1 = 
+ramp-volume-2 = 
+
+; Only applies if <bar-volume> is used
+bar-volume-width = 10
+bar-volume-gradient = false
+
+bar-volume-indicator = ${bar.indicator}
+bar-volume-indicator-foreground = ${color.foreground}
+
+bar-volume-fill = ${bar.fill}
+bar-volume-foreground-0 = ${color.foreground}
+bar-volume-foreground-1 = ${color.foreground}
+bar-volume-foreground-2 = ${color.foreground}
+
+bar-volume-empty = ${bar.empty}
+bar-volume-empty-foreground = ${color.foreground}
+
+; If defined, it will replace <ramp-volume> when
+; headphones are plugged in to `headphone_control_numid`
+; If undefined, <ramp-volume> will be used for both
+; Only applies if <ramp-volume> is used
+ramp-headphones-0 = 
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/brightness]
+;type = internal/xbacklight
+type = internal/backlight
+
+; Use the following command to list available cards:
+; $ ls -1 /sys/class/backlight/
+;card = intel_backlight
+card = amdgpu_bl0
+
+; Available tags:
+;   <label> (default)
+;   <ramp>
+;   <bar>
+format = <ramp> <bar>
+
+; Available tokens:
+;   %percentage% (default)
+label = %percentage%%
+
+; Only applies if <ramp> is used
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-3 = 
+ramp-4 = 
+
+; Only applies if <bar> is used
+bar-width = 10
+bar-gradient = false
+
+bar-indicator = ${bar.indicator}
+bar-indicator-foreground = ${color.foreground}
+
+bar-fill = ${bar.fill}
+bar-foreground-0 = ${color.foreground}
+bar-foreground-1 = ${color.foreground}
+bar-foreground-2 = ${color.foreground}
+
+bar-empty = ${bar.empty}
+bar-empty-foreground = ${color.foreground}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/battery_bar]
+type = internal/battery
+
+; This is useful in case the battery never reports 100% charge
+full-at = 99
+
+; Use the following command to list batteries and adapters:
+; $ ls -1 /sys/class/power_supply/
+battery = BAT1
+adapter = ACAD
+
+; If an inotify event haven't been reported in this many
+; seconds, manually poll for new values.
+;
+; Needed as a fallback for systems that don't report events
+; on sysfs/procfs.
+;
+; Disable polling by setting the interval to 0.
+;
+; Default: 5
+poll-interval = 2
+
+; see "man date" for details on how to format the time string
+; NOTE: if you want to use syntax tags here you need to use %%{...}
+; Default: %H:%M:%S
+time-format = %H:%M
+
+; Available tags:
+;   <label-charging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-charging>
+format-charging = <bar-capacity>
+format-charging-prefix = " "
+
+; Available tags:
+;   <label-discharging> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;   <animation-discharging>
+format-discharging = <bar-capacity>
+format-discharging-prefix = " " 
+
+; Available tags:
+;   <label-full> (default)
+;   <bar-capacity>
+;   <ramp-capacity>
+;format-full = <ramp-capacity> <label-full>
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current charge rate in watts)
+
+label-charging = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+;   %time%
+;   %consumption% (shows current discharge rate in watts)
+label-discharging = %percentage%%
+
+; Available tokens:
+;   %percentage% (default)
+label-full = " Full"
+
+; Only applies if <bar-capacity> is used
+bar-capacity-width = 10
+bar-capacity-gradient = false
+
+bar-capacity-indicator = ${bar.indicator}
+bar-capacity-indicator-foreground = ${color.foreground}
+
+bar-capacity-fill = ${bar.fill}
+bar-capacity-foreground-0 = ${color.foreground}
+bar-capacity-foreground-1 = ${color.foreground}
+bar-capacity-foreground-2 = ${color.foreground}
+
+bar-capacity-empty = ${bar.empty}
+bar-capacity-empty-foreground = ${color.foreground}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/cpu_bar]
+type = internal/cpu
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 0.5
+
+; Available tags:
+;   <label> (default)
+;   <bar-load>
+;   <ramp-load>
+;   <ramp-coreload>
+;;format = <label> <ramp-coreload>
+format = <bar-load> <label>
+format-prefix = " "
+
+; Available tokens:
+;   %percentage% (default) - total cpu load averaged over all cores
+;   %percentage-sum% - Cumulative load on all cores
+;   %percentage-cores% - load percentage for each core
+;   %percentage-core[1-9]% - load percentage for specific core
+label = "%percentage%%"
+
+; Only applies if <bar-load> is used
+bar-load-width = 10
+bar-load-gradient = false
+
+bar-load-indicator = ${bar.indicator}
+bar-load-indicator-foreground = ${color.foreground}
+
+bar-load-fill = ${bar.fill}
+bar-load-foreground-0 = ${color.foreground}
+bar-load-foreground-1 = ${color.foreground}
+bar-load-foreground-2 = ${color.foreground}
+
+bar-load-empty = ${bar.empty}
+bar-load-empty-foreground = ${color.foreground}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/filesystem_bar]
+type = internal/fs
+
+; Mountpoints to display
+mount-0 = /
+;;mount-1 = /home
+;;mount-2 = /var
+
+; Seconds to sleep between updates
+; Default: 30
+interval = 30
+
+; Display fixed precision values
+; Default: false
+fixed-values = false
+
+; Spacing between entries
+; Default: 2
+;;spacing = 4
+
+; Available tags:
+;   <label-mounted> (default)
+;   <bar-free>
+;   <bar-used>
+;   <ramp-capacity>
+format-mounted = <bar-used> <label-mounted>
+format-mounted-prefix = " "
+
+; Available tags:
+;   <label-unmounted> (default)
+format-unmounted = <label-unmounted>
+format-unmounted-prefix = " "
+
+; Available tokens:
+;   %mountpoint%
+;   %type%
+;   %fsname%
+;   %percentage_free%
+;   %percentage_used%
+;   %total%
+;   %free%
+;   %used%
+; Default: %mountpoint% %percentage_free%%
+label-mounted = %used%/%total%
+
+; Available tokens:
+;   %mountpoint%
+; Default: %mountpoint% is not mounted
+label-unmounted = " %mountpoint%: not mounted"
+
+; Only applies if <bar-used> is used
+bar-used-width = 10
+bar-used-gradient = false
+
+bar-used-indicator = ${bar.indicator}
+bar-used-indicator-foreground = ${color.foreground}
+
+bar-used-fill = ${bar.fill}
+bar-used-foreground-0 = ${color.foreground}
+bar-used-foreground-1 = ${color.foreground}
+bar-used-foreground-2 = ${color.foreground}
+
+bar-used-empty = ${bar.empty}
+bar-used-empty-foreground = ${color.foreground}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/memory_bar]
+type = internal/memory
+
+; Seconds to sleep between updates
+; Default: 1
+interval = 2
+
+; Available tags:
+;   <label> (default)
+;   <bar-used>
+;   <bar-free>
+;   <ramp-used>
+;   <ramp-free>
+;   <bar-swap-used>
+;   <bar-swap-free>
+;   <ramp-swap-used>
+;   <ramp-swap-free>
+format = <bar-used> <label>
+format-prefix = " "
+
+; Available tokens:
+;   %percentage_used% (default)
+;   %percentage_free%
+;   %gb_used%
+;   %gb_free%
+;   %gb_total%
+;   %mb_used%
+;   %mb_free%
+;   %mb_total%
+;   %percentage_swap_used%
+;   %percentage_swap_free%
+;   %mb_swap_total%
+;   %mb_swap_free%
+;   %mb_swap_used%
+;   %gb_swap_total%
+;   %gb_swap_free%
+;   %gb_swap_used%
+
+label = "%mb_used%"
+
+; Only applies if <bar-used> is used
+bar-used-width = 10
+bar-used-gradient = false
+
+bar-used-indicator = ${bar.indicator}
+bar-used-indicator-foreground = ${color.foreground}
+
+bar-used-fill = ${bar.fill}
+bar-used-foreground-0 = ${color.foreground}
+bar-used-foreground-1 = ${color.foreground}
+bar-used-foreground-2 = ${color.foreground}
+
+bar-used-empty = ${bar.empty}
+bar-used-empty-foreground = ${color.foreground}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/mpd_bar]
+type = internal/mpd
+
+; Host where mpd is running (either ip or domain name)
+; Can also be the full path to a unix socket where mpd is running.
+;;host = 127.0.0.1
+;;port = 6600
+;;password = mysecretpassword
+
+; Seconds to sleep between progressbar/song timer sync
+; Default: 1
+interval = 1
+
+; Available tags:
+;   <label-song> (default)
+;   <label-time>
+;   <bar-progress>
+;   <toggle> - gets replaced with <icon-(pause|play)>
+;   <toggle-stop> - gets replaced with <icon-(stop|play)>
+;   <icon-random>
+;   <icon-repeat>
+;   <icon-repeatone> (deprecated)
+;   <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
+;   <icon-consume>
+;   <icon-prev>
+;   <icon-stop>
+;   <icon-play>
+;   <icon-pause>
+;   <icon-next>
+;   <icon-seekb>
+;   <icon-seekf>
+format-online = <label-song> <bar-progress> <label-time>
+format-online-prefix = 
+
+;format-playing = ${self.format-online}
+;format-paused = ${self.format-online}
+;format-stopped = ${self.format-online}
+
+; Available tags:
+;   <label-offline>
+format-offline = <label-offline>
+format-offline-prefix = 
+
+; Available tokens:
+;   %artist%
+;   %album-artist%
+;   %album%
+;   %date%
+;   %title%
+; Default: %artist% - %title%
+label-song =  " %artist% - %title%"
+label-song-maxlen = 25
+label-song-ellipsis = true
+
+; Available tokens:
+;   %elapsed%
+;   %total%
+; Default: %elapsed% / %total%
+label-time = %elapsed% / %total%
+
+; Available tokens:
+;   None
+label-offline = " Offline"
+
+; Only applies if <icon-X> is used
+icon-play = 
+icon-pause = 
+icon-stop = 
+icon-next = 
+icon-prev = 
+icon-seekf = 
+icon-seekb = 
+icon-random = 
+icon-repeat = 
+icon-repeatone = 
+icon-single = 
+icon-consume =
+
+; Used to display the state of random/repeat/repeatone/single
+; Only applies if <icon-[random|repeat|repeatone|single]> is used
+toggle-on-foreground = ${color.primary}
+toggle-off-foreground = ${color.secondary}
+
+; Only applies if <bar-progress> is used
+bar-progress-width = 10
+bar-progress-gradient = false
+
+bar-progress-indicator = ${bar.indicator}
+bar-progress-indicator-foreground = ${color.foreground}
+
+bar-progress-fill = ${bar.fill}
+bar-progress-foreground-0 = ${color.foreground}
+bar-progress-foreground-1 = ${color.foreground}
+bar-progress-foreground-2 = ${color.foreground}
+
+bar-progress-empty = ${bar.empty}
+bar-progress-empty-foreground = ${color.foreground}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

2022-archive/debian/polybar/material/colors.ini

@@ -0,0 +1,23 @@
+;; ┌────────────────────────────────────────────────────────────┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█░░░█▀█░█▀▄░█▀▀│
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░░░█░█░█▀▄░▀▀█│
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀▀▀░▀▀▀░▀░▀░▀▀▀│
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│
+;; └────────────────────────────────────────────────────────────┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[color]
+
+;; Use pywal.sh in scripts directory to use colors from an image/wallpaper.
+
+;; main colors
+background = #1F1F1F
+foreground = #FFFFFF
+foreground-alt = #8F8F8F
+module-fg = #FFFFFF
+primary = #009baa
+secondary = #E53935
+alternate = #7cb342
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

2022-archive/debian/polybar/material/config.ini

@@ -0,0 +1,292 @@
+;; ┌────────────────────────────────────────────────────────────┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│
+;; └────────────────────────────────────────────────────────────┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Global WM Settings
+
+[global/wm]
+; Adjust the _NET_WM_STRUT_PARTIAL top value
+; Used for top aligned bars
+margin-bottom = 0
+
+; Adjust the _NET_WM_STRUT_PARTIAL bottom value
+; Used for bottom aligned bars
+margin-top = 0
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; File Inclusion
+; include an external file, like module file, etc.
+
+include-file = ~/.config/polybar/material/bars.ini
+include-file = ~/.config/polybar/material/colors.ini
+include-file = ~/.config/polybar/material/modules.ini
+include-file = ~/.config/polybar/material/user_modules.ini
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Bar Settings
+
+[bar/main]
+; Use either of the following command to list available outputs:
+; If unspecified, the application will pick the first one it finds.
+; $ polybar -m | cut -d ':' -f 1
+; $ xrandr -q | grep " connected" | cut -d ' ' -f1
+monitor =
+
+; Use the specified monitor as a fallback if the main one is not found.
+monitor-fallback =
+
+; Require the monitor to be in connected state
+; XRandR sometimes reports my monitor as being disconnected (when in use)
+monitor-strict = false
+
+; Tell the Window Manager not to configure the window.
+; Use this to detach the bar if your WM is locking its size/position.
+override-redirect = false
+
+; Put the bar at the bottom of the screen
+bottom = false
+
+; Prefer fixed center position for the `modules-center` block
+; When false, the center position will be based on the size of the other blocks.
+fixed-center = true
+
+; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in a width or height of 50% minus 10 pixels
+width = 1920
+height = 35
+
+; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+; the percentage can optionally be extended with a pixel offset like so:
+; 50%:-10, this will result in an offset in the x or y direction 
+; of 50% minus 10 pixels
+offset-x = 0
+offset-y = 0%
+
+; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
+background = ${color.background}
+
+; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
+foreground = ${color.foreground}
+
+; Background gradient (vertical steps)
+;   background-[0-9]+ = #aarrggbb
+;;background-0 = 
+
+; Value used for drawing rounded corners
+; Note: This shouldn't be used together with border-size because the border 
+; doesn't get rounded
+; Individual top/bottom values can be defined using:
+;   radius-{top,bottom}
+radius-top = 0.0
+radius-bottom = 0.0
+
+; Under-/overline pixel size and argb color
+; Individual values can be defined using:
+;   {overline,underline}-size
+;   {overline,underline}-color
+line-size = 2
+line-color = ${color.primary}
+
+; Values applied to all borders
+; Individual side values can be defined using:
+;   border-{left,top,right,bottom}-size
+;   border-{left,top,right,bottom}-color
+; The top and bottom borders are added to the bar height, so the effective
+; window height is:
+;   height + border-top-size + border-bottom-size
+; Meanwhile the effective window width is defined entirely by the width key and
+; the border is placed withing this area. So you effectively only have the
+; following horizontal space on the bar:
+;   width - border-right-size - border-left-size
+border-size = 3
+border-color = ${color.background}
+
+; Number of spaces to add at the beginning/end of the bar
+; Individual side values can be defined using:
+;   padding-{left,right}
+padding = 0
+
+; Number of spaces to add before/after each module
+; Individual side values can be defined using:
+;   module-margin-{left,right}
+module-margin-left = 1
+module-margin-right = 1
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; Fonts are defined using <font-name>;<vertical-offset>
+; Font names are specified using a fontconfig pattern.
+;   font-0 = NotoSans-Regular:size=8;2
+;   font-1 = MaterialIcons:size=10
+;   font-2 = Termsynu:size=8;-1
+;   font-3 = FontAwesome:size=10
+; See the Fonts wiki page for more details
+
+font-0 = "Fantasque Sans Mono:pixelsize=12;3"
+font-1 = "Material\-Design\-Iconic\-Font:size=13;4"
+
+; Modules are added to one of the available blocks
+;   modules-left = cpu ram
+;   modules-center = xwindow xbacklight
+;   modules-right = ipc clock
+
+modules-left = launcher i3
+modules-right = alsa battery network date sysmenu
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+; The separator will be inserted between the output of each module
+separator =
+
+; Opacity value between 0.0 and 1.0 used on fade in/out
+dim-value = 1.0
+
+; Value to be used to set the WM_NAME atom
+; If the value is empty or undefined, the atom value
+; will be created from the following template: polybar-[BAR]_[MONITOR]
+; NOTE: The placeholders are not available for custom values
+wm-name = 
+
+; Locale used to localize various module data (e.g. date)
+; Expects a valid libc locale, for example: sv_SE.UTF-8
+locale = 
+
+; Position of the system tray window
+; If empty or undefined, tray support will be disabled
+; NOTE: A center aligned tray will cover center aligned modules
+;
+; Available positions:
+;   left
+;   center
+;   right
+;   none
+tray-position = none
+
+; If true, the bar will not shift its
+; contents when the tray changes
+tray-detached = false
+
+; Tray icon max size
+tray-maxsize = 16
+
+; Background color for the tray container 
+; ARGB color (e.g. #f00, #ff992a, #ddff1023)
+; By default the tray container will use the bar
+; background color.
+tray-background = ${color.background}
+
+; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
+tray-offset-x = 0
+tray-offset-y = 0
+
+; Pad the sides of each tray icon
+tray-padding = 0
+
+; Scale factor for tray clients
+tray-scale = 1.0
+
+; Restack the bar window and put it above the
+; selected window manager's root
+;
+; Fixes the issue where the bar is being drawn
+; on top of fullscreen window's
+;
+; Currently supported WM's:
+;   bspwm
+;   i3 (requires: `override-redirect = true`)
+;;wm-restack =
+
+; Set a DPI values used when rendering text
+; This only affects scalable fonts
+; dpi = 
+
+; Enable support for inter-process messaging
+; See the Messaging wiki page for more details.
+enable-ipc = true
+
+; Fallback click handlers that will be called if
+; there's no matching module handler found.
+click-left = 
+click-middle = 
+click-right =
+scroll-up =
+scroll-down =
+double-click-left =
+double-click-middle =
+double-click-right =
+
+; Requires polybar to be built with xcursor support (xcb-util-cursor)
+; Possible values are:
+; - default   : The default pointer as before, can also be an empty string (default)
+; - pointer   : Typically in the form of a hand
+; - ns-resize : Up and down arrows, can be used to indicate scrolling
+cursor-click = 
+cursor-scroll = 
+
+;; WM Workspace Specific
+
+; bspwm
+;;scroll-up = bspwm-desknext
+;;scroll-down = bspwm-deskprev
+;;scroll-up = bspc desktop -f prev.local
+;;scroll-down = bspc desktop -f next.local
+
+;i3
+;;scroll-up = i3wm-wsnext
+;;scroll-down = i3wm-wsprev
+;;scroll-up = i3-msg workspace next_on_output
+;;scroll-down = i3-msg workspace prev_on_output
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+;; Application Settings
+
+[settings]
+; The throttle settings lets the eventloop swallow up til X events
+; if they happen within Y millisecond after first event was received.
+; This is done to prevent flood of update event.
+;
+; For example if 5 modules emit an update event at the same time, we really
+; just care about the last one. But if we wait too long for events to swallow
+; the bar would appear sluggish so we continue if timeout
+; expires or limit is reached.
+throttle-output = 5
+throttle-output-for = 10
+
+; Time in milliseconds that the input handler will wait between processing events
+;throttle-input-for = 30
+
+; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
+screenchange-reload = false
+
+; Compositing operators
+; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
+compositing-background = source
+compositing-foreground = over
+compositing-overline = over
+compositing-underline = over
+compositing-border = over
+
+; Define fallback values used by all module formats
+;format-foreground = 
+;format-background = 
+;format-underline =
+;format-overline =
+;format-spacing =
+;format-padding =
+;format-margin =
+;format-offset =
+
+; Enables pseudo-transparency for the bar
+; If set to true the bar can be transparent without a compositor.
+pseudo-transparency = false
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

2022-archive/debian/polybar/material/launch.sh

@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+# Add this script to your wm startup file.
+
+DIR="$HOME/.config/polybar/material"
+
+# Terminate already running bar instances
+killall -q polybar
+
+# Wait until the processes have been shut down
+while pgrep -u $UID -x polybar >/dev/null; do sleep 1; done
+
+# Launch the bar
+polybar -q main -c "$DIR"/config.ini &

2022-archive/debian/polybar/material/scripts/checkupdates

@@ -0,0 +1,117 @@
+#!/usr/bin/bash
+#
+#   checkupdates: Safely print a list of pending updates.
+#
+#   Copyright (c) 2013 Kyle Keen <keenerd@gmail.com>
+#
+#   This program is free software; you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published by
+#   the Free Software Foundation; either version 2 of the License, or
+#   (at your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#   GNU General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+declare -r myname='checkupdates'
+declare -r myver='1.0.0'
+
+plain() {
+	(( QUIET )) && return
+	local mesg=$1; shift
+	printf "${BOLD}    ${mesg}${ALL_OFF}\n" "$@" >&1
+}
+
+msg() {
+	(( QUIET )) && return
+	local mesg=$1; shift
+	printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&1
+}
+
+msg2() {
+	(( QUIET )) && return
+	local mesg=$1; shift
+	printf "${BLUE}  ->${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&1
+}
+
+ask() {
+	local mesg=$1; shift
+	printf "${BLUE}::${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}" "$@" >&1
+}
+
+warning() {
+	local mesg=$1; shift
+	printf "${YELLOW}==> $(gettext "WARNING:")${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+error() {
+	local mesg=$1; shift
+	printf "${RED}==> $(gettext "ERROR:")${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+# check if messages are to be printed using color
+unset ALL_OFF BOLD BLUE GREEN RED YELLOW
+if [[ -t 2 && ! $USE_COLOR = "n" ]]; then
+	# prefer terminal safe colored and bold text when tput is supported
+	if tput setaf 0 &>/dev/null; then
+		ALL_OFF="$(tput sgr0)"
+		BOLD="$(tput bold)"
+		BLUE="${BOLD}$(tput setaf 4)"
+		GREEN="${BOLD}$(tput setaf 2)"
+		RED="${BOLD}$(tput setaf 1)"
+		YELLOW="${BOLD}$(tput setaf 3)"
+	else
+		ALL_OFF="\e[1;0m"
+		BOLD="\e[1;1m"
+		BLUE="${BOLD}\e[1;34m"
+		GREEN="${BOLD}\e[1;32m"
+		RED="${BOLD}\e[1;31m"
+		YELLOW="${BOLD}\e[1;33m"
+	fi
+fi
+readonly ALL_OFF BOLD BLUE GREEN RED YELLOW
+
+
+if (( $# > 0 )); then
+	echo "${myname} v${myver}"
+	echo
+	echo "Safely print a list of pending updates"
+	echo
+	echo "Usage: ${myname}"
+	echo
+	echo 'Note: Export the "CHECKUPDATES_DB" variable to change the path of the temporary database.'
+	exit 0
+fi
+
+if ! type -P fakeroot >/dev/null; then
+	error 'Cannot find the fakeroot binary.'
+	exit 1
+fi
+
+if [[ -z $CHECKUPDATES_DB ]]; then
+	CHECKUPDATES_DB="${TMPDIR:-/tmp}/checkup-db-${USER}/"
+fi
+
+trap 'rm -f $CHECKUPDATES_DB/db.lck' INT TERM EXIT
+
+DBPath="$(pacman-conf DBPath)"
+if [[ -z "$DBPath" ]] || [[ ! -d "$DBPath" ]]; then
+	DBPath="/var/lib/pacman/"
+fi
+
+mkdir -p "$CHECKUPDATES_DB"
+ln -s "${DBPath}/local" "$CHECKUPDATES_DB" &> /dev/null
+if ! fakeroot -- pacman -Sy --dbpath "$CHECKUPDATES_DB" --logfile /dev/null &> /dev/null; then
+       error 'Cannot fetch updates'
+       exit 1
+fi
+pacman -Qu --dbpath "$CHECKUPDATES_DB" 2> /dev/null | grep -v '\[.*\]'
+
+exit 0
+
+# vim: set noet:

2022-archive/debian/polybar/material/scripts/color-switch.sh

@@ -0,0 +1,55 @@
+#!/usr/bin/env bash
+
+SDIR="$HOME/.config/polybar/material/scripts"
+
+# Launch Rofi
+MENU="$(rofi -no-config -no-lazy-grab -sep "|" -dmenu -i -p '' \
+-theme $SDIR/rofi/styles.rasi \
+<<< "♥ amber|♥ blue|♥ blue-gray|♥ brown|♥ cyan|♥ deep-orange|\
+♥ deep-purple|♥ green|♥ gray|♥ indigo|♥ blue-light|♥ green-light|\
+♥ lime|♥ orange|♥ pink|♥ purple|♥ red|♥ teal|♥ yellow|♥ amber-dark|\
+♥ blue-dark|♥ blue-gray-dark|♥ brown-dark|♥ cyan-dark|♥ deep-orange-dark|\
+♥ deep-purple-dark|♥ green-dark|♥ gray-dark|♥ indigo-dark|♥ blue-light-dark|\
+♥ green-light-dark|♥ lime-dark|♥ orange-dark|♥ pink-dark|♥ purple-dark|♥ red-dark|♥ teal-dark|♥ yellow-dark|")"
+            case "$MENU" in
+				## Light Colors
+				*amber) "$SDIR"/colors-light.sh --amber ;;
+				*blue) "$SDIR"/colors-light.sh --blue ;;
+				*blue-gray) "$SDIR"/colors-light.sh --blue-gray ;;
+				*brown) "$SDIR"/colors-light.sh --brown ;;
+				*cyan) "$SDIR"/colors-light.sh --cyan ;;
+				*deep-orange) "$SDIR"/colors-light.sh --deep-orange ;;
+				*deep-purple) "$SDIR"/colors-light.sh --deep-purple ;;
+				*green) "$SDIR"/colors-light.sh --green ;;
+				*gray) "$SDIR"/colors-light.sh --gray ;;
+				*indigo) "$SDIR"/colors-light.sh --indigo ;;
+				*blue-light) "$SDIR"/colors-light.sh --light-blue ;;
+				*green-light) "$SDIR"/colors-light.sh --light-green ;;
+				*lime) "$SDIR"/colors-light.sh --lime ;;
+				*orange) "$SDIR"/colors-light.sh --orange ;;
+				*pink) "$SDIR"/colors-light.sh --pink ;;
+				*purple) "$SDIR"/colors-light.sh --purple ;;
+				*red) "$SDIR"/colors-light.sh --red ;;
+				*teal) "$SDIR"/colors-light.sh --teal ;;
+				*yellow) "$SDIR"/colors-light.sh --yellow ;;
+				## Dark Colors
+				*amber-dark) "$SDIR"/colors-dark.sh --amber ;;
+				*blue-dark) "$SDIR"/colors-dark.sh --blue ;;
+				*blue-gray-dark) "$SDIR"/colors-dark.sh --blue-gray ;;
+				*brown-dark) "$SDIR"/colors-dark.sh --brown ;;
+				*cyan-dark) "$SDIR"/colors-dark.sh --cyan ;;
+				*deep-orange-dark) "$SDIR"/colors-dark.sh --deep-orange ;;
+				*deep-purple-dark) "$SDIR"/colors-dark.sh --deep-purple ;;
+				*green-dark) "$SDIR"/colors-dark.sh --green ;;
+				*gray-dark) "$SDIR"/colors-dark.sh --gray ;;
+				*indigo-dark) "$SDIR"/colors-dark.sh --indigo ;;
+				*blue-light-dark) "$SDIR"/colors-dark.sh --light-blue ;;
+				*green-light-dark) "$SDIR"/colors-dark.sh --light-green ;;
+				*lime-dark) "$SDIR"/colors-dark.sh --lime ;;
+				*orange-dark) "$SDIR"/colors-dark.sh --orange ;;
+				*pink-dark) "$SDIR"/colors-dark.sh --pink ;;
+				*purple-dark) "$SDIR"/colors-dark.sh --purple ;;
+				*red-dark) "$SDIR"/colors-dark.sh --red ;;
+				*teal-dark) "$SDIR"/colors-dark.sh --teal ;;
+				*yellow-dark) "$SDIR"/colors-dark.sh --yellow				
+            esac

2022-archive/debian/polybar/material/scripts/colors-dark.sh

@@ -0,0 +1,120 @@
+#!/usr/bin/env bash
+
+# Color files
+PFILE="$HOME/.config/polybar/material/colors.ini"
+RFILE="$HOME/.config/polybar/material/scripts/rofi/colors.rasi"
+
+# Change colors
+change_color() {
+	# polybar
+	sed -i -e 's/background = #.*/background = #1F1F1F/g' $PFILE
+	sed -i -e 's/foreground = #.*/foreground = #FFFFFF/g' $PFILE
+	sed -i -e 's/foreground-alt = #.*/foreground-alt = #8F8F8F/g' $PFILE
+	sed -i -e "s/module-fg = #.*/module-fg = $MF/g" $PFILE
+	sed -i -e "s/primary = #.*/primary = $AC/g" $PFILE
+	sed -i -e 's/secondary = #.*/secondary = #E53935/g' $PFILE
+	sed -i -e 's/alternate = #.*/alternate = #7cb342/g' $PFILE
+	
+	# rofi
+	cat > $RFILE <<- EOF
+	/* colors */
+
+	* {
+	  al:   #00000000;
+	  bg:   #1F1F1FFF;
+	  bga:  ${AC}33;
+	  bar:  ${MF}FF;
+	  fg:   #FFFFFFFF;
+	  ac:   ${AC}FF;
+	}
+	EOF
+	
+	polybar-msg cmd restart
+}
+
+if  [[ $1 = "--amber" ]]; then
+	MF="#1F1F1F"
+	AC="#ffb300"
+	change_color
+elif  [[ $1 = "--blue" ]]; then
+	MF="#FFFFFF"
+	AC="#1e88e5"
+	change_color
+elif  [[ $1 = "--blue-gray" ]]; then
+	MF="#FFFFFF"
+	AC="#546e7a"
+	change_color
+elif  [[ $1 = "--brown" ]]; then
+	MF="#FFFFFF"
+	AC="#6d4c41"
+	change_color
+elif  [[ $1 = "--cyan" ]]; then
+	MF="#1F1F1F"
+	AC="#00acc1"
+	change_color
+elif  [[ $1 = "--deep-orange" ]]; then
+	MF="#FFFFFF"
+	AC="#f4511e"
+	change_color
+elif  [[ $1 = "--deep-purple" ]]; then
+	MF="#FFFFFF"
+	AC="#5e35b1"
+	change_color
+elif  [[ $1 = "--green" ]]; then
+	MF="#FFFFFF"
+	AC="#43a047"
+	change_color
+elif  [[ $1 = "--gray" ]]; then
+	MF="#FFFFFF"
+	AC="#757575"
+	change_color
+elif  [[ $1 = "--indigo" ]]; then
+	MF="#FFFFFF"
+	AC="#3949ab"
+	change_color
+elif  [[ $1 = "--light-blue" ]]; then
+	MF="#1F1F1F"
+	AC="#039be5"
+	change_color
+elif  [[ $1 = "--light-green" ]]; then
+	MF="#1F1F1F"
+	AC="#7cb342"
+	change_color
+elif  [[ $1 = "--lime" ]]; then
+	MF="#1F1F1F"
+	AC="#c0ca33"
+	change_color
+elif  [[ $1 = "--orange" ]]; then
+	MF="#1F1F1F"
+	AC="#fb8c00"
+	change_color
+elif  [[ $1 = "--pink" ]]; then
+	MF="#FFFFFF"
+	AC="#d81b60"
+	change_color
+elif  [[ $1 = "--purple" ]]; then
+	MF="#FFFFFF"
+	AC="#8e24aa"
+	change_color
+elif  [[ $1 = "--red" ]]; then
+	MF="#FFFFFF"
+	AC="#e53935"
+	change_color
+elif  [[ $1 = "--teal" ]]; then
+	MF="#FFFFFF"
+	AC="#00897b"
+	change_color
+elif  [[ $1 = "--yellow" ]]; then
+	MF="#1F1F1F"
+	AC="#fdd835"
+	change_color
+else
+	cat <<- _EOF_
+	No option specified, Available options:
+	--amber	--blue		--blue-gray	--brown
+	--cyan	--deep-orange	--deep-purple	--green
+	--gray	--indigo	--light-blue	--light-green
+	--lime	--orange	--pink		--purple
+	--red	--teal		--yellow
+	_EOF_
+fi

2022-archive/debian/polybar/material/scripts/colors-light.sh

@@ -0,0 +1,120 @@
+#!/usr/bin/env bash
+
+# Color files
+PFILE="$HOME/.config/polybar/material/colors.ini"
+RFILE="$HOME/.config/polybar/material/scripts/rofi/colors.rasi"
+
+# Change colors
+change_color() {
+	# polybar
+	sed -i -e 's/background = #.*/background = #FFFFFF/g' $PFILE
+	sed -i -e 's/foreground = #.*/foreground = #2E2E2E/g' $PFILE
+	sed -i -e 's/foreground-alt = #.*/foreground-alt = #656565/g' $PFILE
+	sed -i -e "s/module-fg = #.*/module-fg = $MF/g" $PFILE
+	sed -i -e "s/primary = #.*/primary = $AC/g" $PFILE
+	sed -i -e 's/secondary = #.*/secondary = #E53935/g' $PFILE
+	sed -i -e 's/alternate = #.*/alternate = #7cb342/g' $PFILE
+	
+	# rofi
+	cat > $RFILE <<- EOF
+	/* colors */
+
+	* {
+	  al:   #00000000;
+	  bg:   #FFFFFFFF;
+	  bga:  ${AC}33;
+	  bar:  ${MF}FF;
+	  fg:   #2E2E2EFF;
+	  ac:   ${AC}FF;
+	}
+	EOF
+	
+	polybar-msg cmd restart
+}
+
+if  [[ $1 = "--amber" ]]; then
+	MF="#2E2E2E"
+	AC="#ffb300"
+	change_color
+elif  [[ $1 = "--blue" ]]; then
+	MF="#2E2E2E"
+	AC="#1e88e5"
+	change_color
+elif  [[ $1 = "--blue-gray" ]]; then
+	MF="#FFFFFF"
+	AC="#546e7a"
+	change_color
+elif  [[ $1 = "--brown" ]]; then
+	MF="#FFFFFF"
+	AC="#6d4c41"
+	change_color
+elif  [[ $1 = "--cyan" ]]; then
+	MF="#2E2E2E"
+	AC="#00acc1"
+	change_color
+elif  [[ $1 = "--deep-orange" ]]; then
+	MF="#FFFFFF"
+	AC="#f4511e"
+	change_color
+elif  [[ $1 = "--deep-purple" ]]; then
+	MF="#FFFFFF"
+	AC="#5e35b1"
+	change_color
+elif  [[ $1 = "--green" ]]; then
+	MF="#FFFFFF"
+	AC="#43a047"
+	change_color
+elif  [[ $1 = "--gray" ]]; then
+	MF="#FFFFFF"
+	AC="#757575"
+	change_color
+elif  [[ $1 = "--indigo" ]]; then
+	MF="#FFFFFF"
+	AC="#3949ab"
+	change_color
+elif  [[ $1 = "--light-blue" ]]; then
+	MF="#2E2E2E"
+	AC="#039be5"
+	change_color
+elif  [[ $1 = "--light-green" ]]; then
+	MF="#2E2E2E"
+	AC="#7cb342"
+	change_color
+elif  [[ $1 = "--lime" ]]; then
+	MF="#2E2E2E"
+	AC="#c0ca33"
+	change_color
+elif  [[ $1 = "--orange" ]]; then
+	MF="#2E2E2E"
+	AC="#fb8c00"
+	change_color
+elif  [[ $1 = "--pink" ]]; then
+	MF="#FFFFFF"
+	AC="#d81b60"
+	change_color
+elif  [[ $1 = "--purple" ]]; then
+	MF="#FFFFFF"
+	AC="#8e24aa"
+	change_color
+elif  [[ $1 = "--red" ]]; then
+	MF="#FFFFFF"
+	AC="#e53935"
+	change_color
+elif  [[ $1 = "--teal" ]]; then
+	MF="#FFFFFF"
+	AC="#00897b"
+	change_color
+elif  [[ $1 = "--yellow" ]]; then
+	MF="#2E2E2E"
+	AC="#fdd835"
+	change_color
+else
+	cat <<- _EOF_
+	No option specified, Available options:
+	--amber	--blue		--blue-gray	--brown
+	--cyan	--deep-orange	--deep-purple	--green
+	--gray	--indigo	--light-blue	--light-green
+	--lime	--orange	--pink		--purple
+	--red	--teal		--yellow
+	_EOF_
+fi

2022-archive/debian/polybar/material/scripts/launcher.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+
+rofi -no-config -no-lazy-grab -show drun -modi drun -theme ~/.config/polybar/material/scripts/rofi/launcher.rasi

2022-archive/debian/polybar/material/scripts/powermenu.sh

@@ -0,0 +1,95 @@
+#!/usr/bin/env bash
+
+## Author  : Aditya Shakya
+## Mail    : adi1090x@gmail.com
+## Github  : @adi1090x
+## Twitter : @adi1090x
+
+dir="~/.config/polybar/material/scripts/rofi"
+uptime=$(uptime -p | sed -e 's/up //g')
+
+rofi_command="rofi -no-config -theme $dir/powermenu.rasi"
+
+# Options
+shutdown=" Shutdown"
+reboot=" Restart"
+lock=" Lock"
+suspend=" Sleep"
+logout=" Logout"
+
+# Confirmation
+confirm_exit() {
+	rofi -dmenu\
+        -no-config\
+		-i\
+		-no-fixed-num-lines\
+		-p "Are You Sure? : "\
+		-theme $dir/confirm.rasi
+}
+
+# Message
+msg() {
+	rofi -no-config -theme "$dir/message.rasi" -e "Available Options  -  yes / y / no / n"
+}
+
+# Variable passed to rofi
+options="$lock\n$suspend\n$logout\n$reboot\n$shutdown"
+
+chosen="$(echo -e "$options" | $rofi_command -p "Uptime: $uptime" -dmenu -selected-row 0)"
+case $chosen in
+    $shutdown)
+		ans=$(confirm_exit &)
+		if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then
+			systemctl poweroff
+		elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then
+			exit 0
+        else
+			msg
+        fi
+        ;;
+    $reboot)
+		ans=$(confirm_exit &)
+		if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then
+			systemctl reboot
+		elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then
+			exit 0
+        else
+			msg
+        fi
+        ;;
+    $lock)
+		if [[ -f /usr/bin/i3lock ]]; then
+			i3lock
+		elif [[ -f /usr/bin/betterlockscreen ]]; then
+			betterlockscreen -l
+		fi
+        ;;
+    $suspend)
+		ans=$(confirm_exit &)
+		if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then
+			mpc -q pause
+			amixer set Master mute
+			systemctl suspend
+		elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then
+			exit 0
+        else
+			msg
+        fi
+        ;;
+    $logout)
+		ans=$(confirm_exit &)
+		if [[ $ans == "yes" || $ans == "YES" || $ans == "y" || $ans == "Y" ]]; then
+			if [[ "$DESKTOP_SESSION" == "Openbox" ]]; then
+				openbox --exit
+			elif [[ "$DESKTOP_SESSION" == "bspwm" ]]; then
+				bspc quit
+			elif [[ "$DESKTOP_SESSION" == "i3" ]]; then
+				i3-msg exit
+			fi
+		elif [[ $ans == "no" || $ans == "NO" || $ans == "n" || $ans == "N" ]]; then
+			exit 0
+        else
+			msg
+        fi
+        ;;
+esac

2022-archive/debian/polybar/material/scripts/pywal.sh

@@ -0,0 +1,87 @@
+#!/usr/bin/env bash
+
+# Color files
+PFILE="$HOME/.config/polybar/material/colors.ini"
+RFILE="$HOME/.config/polybar/material/scripts/rofi/colors.rasi"
+WFILE="$HOME/.cache/wal/colors.sh"
+
+# Get colors
+pywal_get() {
+	wal -i "$1" -q -t
+}
+
+# Change colors
+change_color() {
+	# polybar
+	sed -i -e "s/background = #.*/background = $BG/g" $PFILE
+	sed -i -e "s/foreground = #.*/foreground = $FG/g" $PFILE
+	sed -i -e "s/foreground-alt = #.*/foreground-alt = $FGA/g" $PFILE
+	sed -i -e "s/module-fg = #.*/module-fg = $MF/g" $PFILE
+	sed -i -e "s/primary = #.*/primary = $AC/g" $PFILE
+	sed -i -e "s/secondary = #.*/secondary = $SC/g" $PFILE
+	sed -i -e "s/alternate = #.*/alternate = $AL/g" $PFILE
+	
+	# rofi
+	cat > $RFILE <<- EOF
+	/* colors */
+
+	* {
+	  al:   #00000000;
+	  bg:   ${BG}FF;
+	  bga:  ${AC}33;
+	  bar:  ${MF}FF;
+	  fg:   ${FG}FF;
+	  ac:   ${AC}FF;
+	}
+	EOF
+}
+
+hex_to_rgb() {
+    # Convert a hex value WITHOUT the hashtag (#)
+    R=$(printf "%d" 0x${1:0:2})
+    G=$(printf "%d" 0x${1:2:2})
+    B=$(printf "%d" 0x${1:4:2})
+}
+
+get_fg_color(){
+    INTENSITY=$(calc "$R*0.299 + $G*0.587 + $B*0.114")
+    
+    if [ $(echo "$INTENSITY>186" | bc) -eq 1 ]; then
+        MF="#202020"
+    else
+        MF="#F5F5F5"
+    fi
+}
+
+# Main
+if [[ -x "`which wal`" ]]; then
+	if [[ "$1" ]]; then
+		pywal_get "$1"
+
+		# Source the pywal color file
+		if [[ -e "$WFILE" ]]; then
+			. "$WFILE"
+		else
+			echo 'Color file does not exist, exiting...'
+			exit 1
+		fi
+
+		BG=`printf "%s\n" "$background"`
+		FG=`printf "%s\n" "$foreground"`
+		FGA=`printf "%s\n" "$color8"`
+		AC=`printf "%s\n" "$color1"`
+		SC=`printf "%s\n" "$color2"`
+		AL=`printf "%s\n" "$color3"`
+
+		HEX=${AC:1}
+
+		hex_to_rgb $HEX
+		get_fg_color
+		change_color
+	else
+		echo -e "[!] Please enter the path to wallpaper. \n"
+		echo "Usage : ./pywal.sh path/to/image"
+	fi
+else
+	echo "[!] 'pywal' is not installed."
+fi

2022-archive/debian/polybar/material/scripts/random.sh

@@ -0,0 +1,96 @@
+#!/usr/bin/env bash
+
+# Color files
+PFILE="$HOME/.config/polybar/material/colors.ini"
+RFILE="$HOME/.config/polybar/material/scripts/rofi/colors.rasi"
+
+# Change colors
+change_color() {
+	# polybar
+	sed -i -e "s/background = #.*/background = $BG/g" $PFILE
+	sed -i -e "s/foreground = #.*/foreground = $FG/g" $PFILE
+	sed -i -e "s/foreground-alt = #.*/foreground-alt = $FGA/g" $PFILE
+	sed -i -e "s/module-fg = #.*/module-fg = $MF/g" $PFILE
+	sed -i -e "s/primary = #.*/primary = $AC/g" $PFILE
+	sed -i -e "s/secondary = #.*/secondary = $SC/g" $PFILE
+	sed -i -e "s/alternate = #.*/alternate = $AL/g" $PFILE
+	
+	# rofi
+	cat > $RFILE <<- EOF
+	/* colors */
+
+	* {
+	  al:   #00000000;
+	  bg:   ${BG}FF;
+	  bga:  ${AC}33;
+	  bar:  ${MF}FF;
+	  fg:   ${FG}FF;
+	  ac:   ${AC}FF;
+	}
+	EOF
+
+	polybar-msg cmd restart
+}
+
+get_random_number() {
+	RNUM=$(( ($RANDOM % $1) + 1 ))
+}
+
+get_random_color() {
+	RCOLOR="#"
+	for i in 1 2 3 4 5 6
+	do
+		get_random_number "16"
+		case $RNUM in
+			"1") NEXTDIGIT="1";;
+			"2") NEXTDIGIT="2";;
+			"3") NEXTDIGIT="3";;
+			"4") NEXTDIGIT="4";;
+			"5") NEXTDIGIT="5";;
+			"6") NEXTDIGIT="6";;
+			"7") NEXTDIGIT="7";;
+			"8") NEXTDIGIT="8";;
+			"9") NEXTDIGIT="9";;
+			"10") NEXTDIGIT="A";;
+			"11") NEXTDIGIT="B";;
+			"12") NEXTDIGIT="C";;
+			"13") NEXTDIGIT="D";;
+			"14") NEXTDIGIT="E";;
+			"15") NEXTDIGIT="F";;
+			"16") NEXTDIGIT="0";;
+		esac
+		RCOLOR="$RCOLOR$NEXTDIGIT"
+	done
+	echo $RCOLOR
+}
+
+hex_to_rgb() {
+    # Convert a hex value WITHOUT the hashtag (#)
+    R=$(printf "%d" 0x${1:0:2})
+    G=$(printf "%d" 0x${1:2:2})
+    B=$(printf "%d" 0x${1:4:2})
+}
+
+get_fg_color(){
+    INTENSITY=$(calc "$R*0.299 + $G*0.587 + $B*0.114")
+    
+    if [ $(echo "$INTENSITY>186" | bc) -eq 1 ]; then
+        MF="#0a0a0a"
+    else
+        MF="#F5F5F5"
+    fi
+}
+
+# Main
+BG='#1F1F1F'	# change to light bg
+FG='#FFFFFF'	# change to dark fg
+FGA=`get_random_color`
+AC=`get_random_color`
+SC=`get_random_color`
+AL=`get_random_color`
+
+HEX=${AC:1}
+
+hex_to_rgb $HEX
+get_fg_color
+change_color

2022-archive/debian/polybar/material/scripts/rofi/colors.rasi

@@ -0,0 +1,10 @@
+/* colors */
+
+* {
+  al:   #00000000;
+  bg:   #1F1F1FFF;
+  bga:  #009baa33;
+  bar:  #FFFFFFFF;
+  fg:   #FFFFFFFF;
+  ac:   #009baaFF;
+}

2022-archive/debian/polybar/material/scripts/rofi/confirm.rasi

@@ -0,0 +1,24 @@
+/* Confirm Dialog */
+
+@import "colors.rasi"
+
+* {
+    background-color:       @bg;
+    text-color:             @fg;
+	font:				 	"Fantasque Sans Mono 10";
+}
+
+window {
+    width:      			225px;
+    padding:    			25px;
+    border:					1px;
+    border-radius:          0px;
+    border-color:           @ac;
+    location:               center;
+    y-offset:               -2em;
+}
+
+entry {
+    expand: 				true;
+    text-color:				@ac;
+}

2022-archive/debian/polybar/material/scripts/rofi/launcher.rasi

@@ -0,0 +1,119 @@
+/*
+ *
+ * Author  : Aditya Shakya
+ * Mail    : adi1090x@gmail.com
+ * Github  : @adi1090x
+ * Twitter : @adi1090x
+ *
+ */
+
+configuration {
+	font:							"Fantasque Sans Mono 12";
+    show-icons:                     true;
+	icon-theme: 					"Papirus";
+    display-drun: 					"";
+    drun-display-format:            "{name}";
+    disable-history:                false;
+    fullscreen:                     false;
+	hide-scrollbar: 				true;
+	sidebar-mode: 					false;
+}
+
+@import "colors.rasi"
+
+window {
+    transparency:                   "real";
+    background-color:               @bg;
+    text-color:                     @fg;
+	border:							0px;
+	border-color:					@ac;
+    border-radius:                  0px;
+	width:							550px;
+    location:                       center;
+    x-offset:                       0;
+    y-offset:                       0;
+}
+
+prompt {
+    enabled: 						true;
+	padding: 						0px 5px 0px -10px;
+	background-color: 				@al;
+	text-color: 					@bar;
+	font:							"Material\-Design\-Iconic\-Font 12";
+}
+
+entry {
+    background-color:               @al;
+    text-color:                     @bar;
+    placeholder-color:              @bar;
+    expand:                         true;
+    horizontal-align:               0;
+    placeholder:                    "Search...";
+    padding:                        1px;
+    blink:                          true;
+}
+
+inputbar {
+	children: 						[ prompt, entry ];
+    background-color:               @ac;
+    text-color:                     @bar;
+    expand:                         false;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    margin:                         0px;
+    padding:                        15px 0px 12px 25px;
+}
+
+listview {
+    background-color:               @al;
+    padding:                        10px 10px 10px 10px;
+    columns:                        2;
+    lines:                          7;
+    spacing:                        5px;
+    cycle:                          true;
+    dynamic:                        true;
+    layout:                         vertical;
+}
+
+mainbox {
+    background-color:               @al;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    children:                       [ inputbar, listview ];
+    spacing:                       	0px;
+    padding:                        0px;
+}
+
+element {
+    background-color:               @al;
+    text-color:                     @fg;
+    orientation:                    horizontal;
+    border-radius:                  0px;
+    padding:                        10px;
+}
+
+element-icon {
+    background-color:               transparent;
+    text-color:               		inherit;
+    size:                           24px;
+    border:                         0px;
+}
+
+element-text {
+    background-color:               transparent;
+    text-color:               		inherit;
+    expand:                         true;
+    horizontal-align:               0;
+    vertical-align:                 0.5;
+    margin:                         0px 2.5px 0px 2.5px;
+}
+
+element selected {
+    background-color:               @bga;
+    text-color:                     @fg;
+	border:							0px;
+    border-radius:                  0px;
+    border-color:                  	@bg;
+}

2022-archive/debian/polybar/material/scripts/rofi/message.rasi

@@ -0,0 +1,24 @@
+/* Confirm Dialog */
+
+@import "colors.rasi"
+
+* {
+    background-color:       @bg;
+    text-color:             @fg;
+	font:				 	"Fantasque Sans Mono 10";
+}
+
+window {
+    width:      			320px;
+    padding:    			25px;
+    border:					1px;
+    border-radius:          0px;
+    border-color:           @ac;
+    location:               center;
+    y-offset:               -2em;
+}
+
+entry {
+    expand: 				true;
+    text-color:				@ac;
+}

2022-archive/debian/polybar/material/scripts/rofi/networkmenu.rasi

@@ -0,0 +1,126 @@
+/*
+ *
+ * Author  : Aditya Shakya
+ * Mail    : adi1090x@gmail.com
+ * Github  : @adi1090x
+ * Twitter : @adi1090x
+ *
+ */
+
+configuration {
+	font:							"Fantasque Sans Mono 10";
+    show-icons:                     true;
+	icon-theme: 					"Papirus";
+    drun-display-format:            "{name}";
+    disable-history:                false;
+    fullscreen:                     false;
+	hide-scrollbar: 				true;
+	sidebar-mode: 					false;
+}
+
+@import "colors.rasi"
+
+window {
+    transparency:                   "real";
+    background-color:               @bg;
+    text-color:                     @fg;
+	border:							0px;
+	border-color:					@ac;
+    border-radius:                  0px;
+	width:							400px;
+    location:                       center;
+    x-offset:                       0;
+    y-offset:                       0;
+}
+
+prompt {
+    enabled: 						true;
+	padding: 						0px 5px 5px 0px;
+	background-color: 				@al;
+	text-color: 					@bar;
+}
+
+textbox-prompt-colon {
+	padding: 						-2px 5px 5px -10px;
+	font:							"Material\-Design\-Iconic\-Font 12";
+	background-color: 				@al;
+	text-color: 					@bar;
+	expand: false;
+	str: "";
+}
+
+entry {
+    background-color:               @al;
+    text-color:                     @bar;
+    placeholder-color:              @bar;
+    expand:                         true;
+    horizontal-align:               0;
+    placeholder:                    "Search...";
+    padding:                        1px;
+    blink:                          true;
+}
+
+inputbar {
+	children: 						[ textbox-prompt-colon, prompt ];
+    background-color:               @ac;
+    text-color:                     @bar;
+    expand:                         false;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    margin:                         0px;
+    padding:                        15px 0px 8px 25px;
+}
+
+listview {
+    background-color:               @al;
+    padding:                        0px;
+    columns:                        1;
+    lines:                          8;
+    spacing:                        5px;
+    cycle:                          true;
+    dynamic:                        true;
+    layout:                         vertical;
+}
+
+mainbox {
+    background-color:               @al;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    children:                       [ inputbar, listview ];
+    spacing:                       	0px;
+    padding:                        0px;
+}
+
+element {
+    background-color:               @al;
+    text-color:                     @fg;
+    orientation:                    horizontal;
+    border-radius:                  0px;
+    padding:                        15px;
+}
+
+element-icon {
+    background-color:               transparent;
+    text-color:               		inherit;
+    size:                           0px;
+    border:                         0px;
+}
+
+element-text {
+    background-color:               transparent;
+    text-color:               		inherit;
+    expand:                         true;
+    horizontal-align:               0;
+    vertical-align:                 0.5;
+    margin:                         0px 0px 0px -3px;
+}
+
+element selected {
+    background-color:               @bga;
+    text-color:                     @fg;
+	border:							0px;
+    border-radius:                  0px;
+    border-color:                  	@bg;
+}

2022-archive/debian/polybar/material/scripts/rofi/powermenu.rasi

@@ -0,0 +1,126 @@
+/*
+ *
+ * Author  : Aditya Shakya
+ * Mail    : adi1090x@gmail.com
+ * Github  : @adi1090x
+ * Twitter : @adi1090x
+ *
+ */
+
+configuration {
+	font:							"Fantasque Sans Mono 10";
+    show-icons:                     true;
+	icon-theme: 					"Papirus";
+    drun-display-format:            "{name}";
+    disable-history:                false;
+    fullscreen:                     false;
+	hide-scrollbar: 				true;
+	sidebar-mode: 					false;
+}
+
+@import "colors.rasi"
+
+window {
+    transparency:                   "real";
+    background-color:               @bg;
+    text-color:                     @fg;
+	border:							0px;
+	border-color:					@ac;
+    border-radius:                  0px;
+	width:							300px;
+    location:                       center;
+    x-offset:                       0;
+    y-offset:                       0;
+}
+
+prompt {
+    enabled: 						true;
+	padding: 						0px 5px 5px 0px;
+	background-color: 				@al;
+	text-color: 					@bar;
+}
+
+textbox-prompt-colon {
+	padding: 						-2px 5px 5px -10px;
+	font:							"Material\-Design\-Iconic\-Font 12";
+	background-color: 				@al;
+	text-color: 					@bar;
+	expand: false;
+	str: "";
+}
+
+entry {
+    background-color:               @al;
+    text-color:                     @bar;
+    placeholder-color:              @bar;
+    expand:                         true;
+    horizontal-align:               0;
+    placeholder:                    "Search...";
+    padding:                        1px;
+    blink:                          true;
+}
+
+inputbar {
+	children: 						[ textbox-prompt-colon, prompt ];
+    background-color:               @ac;
+    text-color:                     @bar;
+    expand:                         false;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    margin:                         0px;
+    padding:                        15px 0px 8px 25px;
+}
+
+listview {
+    background-color:               @al;
+    padding:                        0px;
+    columns:                        1;
+    lines:                          5;
+    spacing:                        5px;
+    cycle:                          true;
+    dynamic:                        true;
+    layout:                         vertical;
+}
+
+mainbox {
+    background-color:               @al;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    children:                       [ inputbar, listview ];
+    spacing:                       	0px;
+    padding:                        0px;
+}
+
+element {
+    background-color:               @al;
+    text-color:                     @fg;
+    orientation:                    horizontal;
+    border-radius:                  0px;
+    padding:                        15px;
+}
+
+element-icon {
+    background-color:               transparent;
+    text-color:               		inherit;
+    size:                           0px;
+    border:                         0px;
+}
+
+element-text {
+    background-color:               transparent;
+    text-color:               		inherit;
+    expand:                         true;
+    horizontal-align:               0;
+    vertical-align:                 0.5;
+    margin:                         0px 0px 0px -5px;
+}
+
+element selected {
+    background-color:               @bga;
+    text-color:                     @fg;
+	border:							0px;
+    border-radius:                  0px;
+    border-color:                  	@bg;
+}

2022-archive/debian/polybar/material/scripts/rofi/styles.rasi

@@ -0,0 +1,126 @@
+/*
+ *
+ * Author  : Aditya Shakya
+ * Mail    : adi1090x@gmail.com
+ * Github  : @adi1090x
+ * Twitter : @adi1090x
+ *
+ */
+
+configuration {
+	font:							"Fantasque Sans Mono 10";
+    show-icons:                     true;
+	icon-theme: 					"Papirus";
+    drun-display-format:            "{name}";
+    disable-history:                false;
+    fullscreen:                     false;
+	hide-scrollbar: 				true;
+	sidebar-mode: 					false;
+}
+
+@import "colors.rasi"
+
+window {
+    transparency:                   "real";
+    background-color:               @bg;
+    text-color:                     @fg;
+	border:							0px;
+	border-color:					@ac;
+    border-radius:                  0px;
+	width:							300px;
+    location:                       center;
+    x-offset:                       0;
+    y-offset:                       0;
+}
+
+prompt {
+    enabled: 						true;
+	padding: 						0px 5px 5px 0px;
+	background-color: 				@al;
+	text-color: 					@bar;
+}
+
+textbox-prompt-colon {
+	padding: 						0.5px 5px 5px -10px;
+	font:							"Material\-Design\-Iconic\-Font 12";
+	background-color: 				@al;
+	text-color: 					@bar;
+	expand: false;
+	str: "";
+}
+
+entry {
+    background-color:               @al;
+    text-color:                     @bar;
+    placeholder-color:              @bar;
+    expand:                         true;
+    horizontal-align:               0;
+    placeholder:                    "Search";
+    padding:                        2px;
+    blink:                          true;
+}
+
+inputbar {
+	children: 						[ textbox-prompt-colon, entry ];
+    background-color:               @ac;
+    text-color:                     @bar;
+    expand:                         false;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    margin:                         0px;
+    padding:                        15px 0px 8px 25px;
+}
+
+listview {
+    background-color:               @al;
+    padding:                        0px;
+    columns:                        1;
+    lines:                          5;
+    spacing:                        5px;
+    cycle:                          true;
+    dynamic:                        true;
+    layout:                         vertical;
+}
+
+mainbox {
+    background-color:               @al;
+	border:							0px;
+    border-radius:                  0px;
+	border-color:					@ac;
+    children:                       [ inputbar, listview ];
+    spacing:                       	0px;
+    padding:                        0px;
+}
+
+element {
+    background-color:               @al;
+    text-color:                     @fg;
+    orientation:                    horizontal;
+    border-radius:                  0px;
+    padding:                        15px;
+}
+
+element-icon {
+    background-color:               transparent;
+    text-color:               		inherit;
+    size:                           0px;
+    border:                         0px;
+}
+
+element-text {
+    background-color:               transparent;
+    text-color:               		inherit;
+    expand:                         true;
+    horizontal-align:               0;
+    vertical-align:                 0.5;
+    margin:                         0px 0px 0px -5px;
+}
+
+element selected {
+    background-color:               @bga;
+    text-color:                     @fg;
+	border:							0px;
+    border-radius:                  0px;
+    border-color:                  	@bg;
+}

2022-archive/debian/polybar/material/scripts/updates.sh

@@ -0,0 +1,45 @@
+#!/usr/bin/env bash
+
+NOTIFY_ICON=/usr/share/icons/Papirus/32x32/apps/system-software-update.svg
+
+get_total_updates() { UPDATES=$(~/.config/polybar/material/scripts/checkupdates 2>/dev/null | wc -l); }
+
+while true; do
+    get_total_updates
+
+    # notify user of updates
+    if hash notify-send &>/dev/null; then
+        if (( UPDATES > 50 )); then
+            notify-send -u critical -i $NOTIFY_ICON \
+                "You really need to update!!" "$UPDATES New packages"
+        elif (( UPDATES > 25 )); then
+            notify-send -u normal -i $NOTIFY_ICON \
+                "You should update soon" "$UPDATES New packages"
+        elif (( UPDATES > 2 )); then
+            notify-send -u low -i $NOTIFY_ICON \
+                "$UPDATES New packages"
+        fi
+    fi
+
+    # when there are updates available
+    # every 10 seconds another check for updates is done
+    while (( UPDATES > 0 )); do
+        if (( UPDATES == 1 )); then
+            echo " $UPDATES"
+        elif (( UPDATES > 1 )); then
+            echo " $UPDATES"
+        else
+            echo " None"
+        fi
+        sleep 10
+        get_total_updates
+    done
+
+    # when no updates are available, use a longer loop, this saves on CPU
+    # and network uptime, only checking once every 30 min for new updates
+    while (( UPDATES == 0 )); do
+        echo " None"
+        sleep 1800
+        get_total_updates
+    done
+done

2022-archive/debian/polybar/material/user_modules.ini

@@ -0,0 +1,233 @@
+;; ┌──────────────────────────────────────────────────────────────────────────────-----┐
+;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█░█░█▀▀░█▀▀░█▀▄░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀ │
+;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░▀▀█░█▀▀░█▀▄░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█ │
+;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀▀▀░▀░▀░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀ │
+;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│
+;; └──────────────────────────────────────────────────────────────────────────────-----┘
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/updates]
+type = custom/script
+
+; Available tokens:
+;   %counter%
+; Command to be executed (using "/usr/bin/env sh -c [command]")
+exec = ~/.config/polybar/material/scripts/updates.sh
+
+; Conditional command that, if defined, needs to exit successfully
+; before the main exec command is invoked.
+; Default: ""
+;;exec-if = ""
+
+; Will the script output continous content?
+; Default: false
+tail = true
+
+; Seconds to sleep between updates
+; Default: 2 (0 if `tail = true`)
+interval = 5
+
+; Available tags:
+;   <output> - deprecated
+;   <label> (default)
+format = <label>
+format-prefix = 
+
+; Available tokens:
+;   %output%
+; Default: %output%
+label = %output%
+
+; Available tokens:
+;   %counter%
+;   %pid%
+;
+; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c [command]"
+click-left = exo-open --launch TerminalEmulator &
+click-right = exo-open --launch TerminalEmulator &
+;;double-click-left = echo double left %counter%
+;;double-click-middle = echo double middle %counter%
+;;double-click-right = echo double right %counter%
+
+; Available tokens:
+;   %counter%
+;   %pid%
+;
+; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c [command]"
+;;scroll-up = echo scroll up %counter%
+;;scroll-down = echo scroll down %counter%
+
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/launcher]
+type = custom/text
+content = 
+
+; "content" has the same properties as "format-NAME"
+content-background = ${color.primary}
+content-foreground = ${color.module-fg}
+content-padding = 2
+
+; "click-(left|middle|right)" will be executed using "/usr/bin/env sh -c $COMMAND"
+click-left = ~/.config/polybar/material/scripts/launcher.sh &
+;;click-middle = ~/.config/polybar/material/scripts/launcher-full
+click-right = ~/.config/polybar/material/scripts/color-switch.sh &
+
+; "scroll-(up|down)" will be executed using "/usr/bin/env sh -c $COMMAND"
+;;scroll-up = ~/.config/polybar/material/scripts/launcher.sh &
+;;scroll-down = ~/.config/polybar/material/scripts/color-switch.sh &
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/sysmenu]
+type = custom/text
+content = 
+
+content-background = ${color.primary}
+content-foreground = ${color.module-fg}
+content-padding = 2
+
+click-left = ~/.config/polybar/material/scripts/powermenu.sh &
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/color-switch]
+type = custom/text
+content = 
+
+content-background = ${color.background}
+content-foreground = ${color.primary}
+
+click-left = ~/.config/polybar/material/scripts/color-switch.sh &
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/apps]
+type = custom/text
+content-foreground = ${color.foreground-alt}
+content-padding = 1
+
+[module/term]
+inherit = module/apps
+content = 
+click-left = termite &
+click-middle = urxvt &
+click-right = xfce4-terminal &
+
+[module/files]
+inherit = module/apps
+content = 
+click-left = thunar &
+click-right = pcmanfm &
+
+[module/browser]
+inherit = module/apps
+content = 
+click-left = firefox &
+click-right = chromium &
+
+[module/settings]
+inherit = module/apps
+content = 
+click-left = xfce4-settings-manager &
+click-right = lxappearance &
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/powermenu]
+type = custom/menu
+
+; If true, <label-toggle> will be to the left of the menu items (default).
+; If false, it will be on the right of all the items.
+expand-right = true
+
+; "menu-LEVEL-N" has the same properties as "label-NAME" with
+; the additional "exec" property
+;
+; Available exec commands:
+;   menu-open-LEVEL
+;   menu-close
+; Other commands will be executed using "/usr/bin/env sh -c $COMMAND"
+menu-0-0 = reboot
+menu-0-0-exec = menu-open-1
+menu-0-1 = shutdown
+menu-0-1-exec = menu-open-2
+
+menu-1-0 = back
+menu-1-0-exec = menu-open-0
+menu-1-1 = reboot
+menu-1-1-exec = systemctl reboot
+
+menu-2-0 = shutdown
+menu-2-0-exec = systemctl poweroff
+menu-2-1 = back
+menu-2-1-exec = menu-open-0
+
+; Available tags:
+;   <label-toggle> (default) - gets replaced with <label-(open|close)>
+;   <menu> (default)
+; Note that if you use <label-toggle> you must also include
+; the definition for <label-open>
+
+format = <label-toggle> <menu>
+format-background = ${color.primary}
+format-foreground = ${color.module-fg}
+format-padding = 2
+
+label-open = 
+label-close = 
+
+; Optional item separator
+; Default: none
+label-separator = " | "
+
+;;label-open-foreground = ${color.foreground}
+;;label-close-foreground = ${color.background}
+;;label-separator-foreground = ${color.background}
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
+
+[module/menu]
+type = custom/menu
+
+; If true, <label-toggle> will be to the left of the menu items (default).
+; If false, it will be on the right of all the items.
+expand-right = true
+
+; "menu-LEVEL-N" has the same properties as "label-NAME" with
+; the additional "exec" property
+;
+; Available exec commands:
+;   menu-open-LEVEL
+;   menu-close
+; Other commands will be executed using "/usr/bin/env sh -c $COMMAND"
+menu-0-0 = Menu
+menu-0-0-exec = ~/.config/polybar/material/scripts/launcher.sh &
+menu-0-1 = Files
+menu-0-1-exec = thunar &
+menu-0-2 = Terminal
+menu-0-2-exec = termite &
+menu-0-3 = Browser
+menu-0-3-exec = firefox &
+
+; Available tags:
+;   <label-toggle> (default) - gets replaced with <label-(open|close)>
+;   <menu> (default)
+; Note that if you use <label-toggle> you must also include
+; the definition for <label-open>
+
+format = <label-toggle> <menu>
+format-background = ${color.primary}
+format-foreground = ${color.module-fg}
+format-padding = 2
+
+label-open = 
+label-close = 
+
+; Optional item separator
+; Default: none
+label-separator = " | "
+
+;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_